<?xml version="1.0" encoding="UTF-8"?><rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
	    <channel>
        <title>Winchester Collector - Forum: Winchester Rifles</title>
        <link>https://winchestercollector.org/forum/winchester-rifles/</link>
        <description><![CDATA[Official Site of the Winchester Arms Collectors Association]]></description>
        <generator>Simple:Press Version 6.11.14</generator>
        <atom:link href="https://winchestercollector.org/forum/winchester-rifles/rss/" rel="self" type="application/rss+xml"/>
		                <item>
                    <title>TXGunNut on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-3/#p187066</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-3/#p187066</guid>
					                        <description><![CDATA[<p>Neck tension is very easy to find.  Measure the sized neck then measure the neck after seating the bullet.  Difference is the neck tension.  If you want more tension use a smaller diameter expander. -Chuck</p>
<p> </p>
<p>I understand neck tension, Chuck. I load bottleneck cases in bolt guns, I just don't post much about it here because they're all modern. What you're missing is that with this cartridge and many Winchesters chambered for it we don't have the luxury of selecting an optimal neck tension. The bore in my rifles for example is .380" and the mouth of the cartridge must be .393 or smaller and the neck needs to be about .395" to chamber. A lead bullet made of 20-1 or harder lead should be at least .001" larger than the bore diameter. As I explained above a .380" bullet in a case with walls .010" thick will need to be reduced in diameter to work in the above-described chambers. Neck tension goes out the window when the loaded cartridge must be swaged down to fit the chamber! Fortunately Zeb's Browning seems to have a tighter bore than most Winchesters so he can use a bit smaller diameter bullet but he will apparently still need to reduce the size of the case mouth to get them to chamber. </p>
<p> </p>
<p>Mike</p>
]]></description>
					                    <pubDate>Sun, 22 Nov 2026 04:24:14 +0000</pubDate>
                </item>
				                <item>
                    <title>Scott Wagner on Rookie Collector needs advice</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/rookie-collector-needs-advice/#p187065</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/rookie-collector-needs-advice/#p187065</guid>
					                        <description><![CDATA[<p>Welcome new Winchester collector!  I graduated college in 1981 and returned home to join the family farm business.   Enthusiasm ran high to begin collecting guns and I jumped in with both feet.  I purchased a few Winchester books and the Sutherland Colt book.  I needed a framework goal to achieve a top quality collection.  Sutherland's vast Colt collection spanned beginning percussions to early 1920's guns and I realized the huge cost and decades to accumulate were not likely to happen for me. Winchester levers were also considered and the Henry to 1895 models seemed appropriate.  8 models with a few variations and good to go.  Once again the high priced levers and realizing many guns were in the hands of mature collectors as unobtainable.  Model 12's and 42's were the logical choice as to my shotgun passion and budget.  So I began collecting in earnest from 1982 to 1985!  Let me tell you.... having more money and youth than brains quickly got me I trouble.  I am now a factory original purist. My early pursuits ended up with several, unknown to me, reblued and non factory engraved guns.  I learned this, regrouped, slowed down,  and, most importantly found out who are the honest reliable experienced dealers.  Time passes and all these years later, I'm that man with a quality mature collection that I am proud of!  Enjoy the pursuit. The passion and friendships!   Recognize the guns you can easily get every year or two and be patient. Then go after the once a decade, once a lifetime collection cornerstone guns with all you got!  </p>
]]></description>
					                    <pubDate>Sun, 22 Nov 2026 04:19:19 +0000</pubDate>
                </item>
				                <item>
                    <title>Chuck on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-3/#p187064</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-3/#p187064</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>steve004 said </strong><br />
Hmmm.... I guess I'm the odd man out.  I've been loading .38-55's for over 40 years and have shot my own loads in Winchester M1894's, Marlin M1893's and Savage M1899's.  The only difficulty I've ever had was the finished round not fully chambering - which was solved by running the loaded round slightly into the sizing die.  Seemingly, I've escaped a level of craziness that I never knew was lurking around the corner.<br />
  </p>
</blockquote>
<p>It's not just chambering issues but using neck tension to get a measurable and repeatable number to stop having to crimp.  </p>
]]></description>
					                    <pubDate>Sun, 22 Nov 2026 02:25:00 +0000</pubDate>
                </item>
				                <item>
                    <title>Chuck on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-3/#p187062</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-3/#p187062</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>TXGunNut said </strong><br />
Chuck-<br />
As mentioned above I neglected to measure ID after expanding with the .379" expanding die but as you may be able to see the bullet expanded the case when I seated it so the neck tension is a hard number to put a finger on. A more appropriate way of looking at it may be that we have a .380" bullet and .020" of brass compressed to .393 at the case mouth and about .395" just below that so I would say the undersized case compressed the lead bullet .005" and the kiss of the sizing die brought the compression value to 007" at the case mouth with this particular lot of cases and bullets. The sizing die simply applied enough of a tapered crimp to the mouth to allow it to chamber. The most important numbers in all the above are the .393" case mouth and the .395" diameter just below that point as those are the apparent maximum diameters for my 38-55's. It's encouraging that Zeb's chamber is apparently very similar is those dimensions to my older rifles and the bore is somewhat smaller. I think he will be pleased with the results.<br />
 <br />
Mike<br />
  </p>
</blockquote>
<p>Neck tension is very easy to find.  Measure the sized neck then measure the neck after seating the bullet.  Difference is the neck tension.  If you want more tension use a smaller diameter expander. </p>
]]></description>
					                    <pubDate>Sun, 22 Nov 2026 02:15:32 +0000</pubDate>
                </item>
				                <item>
                    <title>mrcvs on Did anyone win this nice Model 1876 rifle today?</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/did-anyone-win-this-nice-model-1876-rifle-today/#p187061</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/did-anyone-win-this-nice-model-1876-rifle-today/#p187061</guid>
					                        <description><![CDATA[<p>I was the runner up bidder.</p>
<p>You got to know when to hold ‘em, know when to fold ‘em…</p>
<p><a href="https://live.amoskeagauction.com/lot-details/index/catalog/141/lot/108667/Excellent-Winchester-Model-1876-Lever-Action-Rifle?url=%2Fauctions%2Fcatalog%2Fid%2F141%3Fpage%3D1%26view%3Dlist%26catm%3D2%26order%3Dorder_num%26xclosed%3D0%26featured%3D0%26lotnum%3D25" rel="nofollow" target="_blank">https://live.amoskeagauction.com/lot-details/index/catalog/141/lot/108667/Excellent-Winchester-Model-1876-Lever-Action-Rifle?url=%2Fauctions%2Fcatalog%2Fid%2F141%3Fpage%3D1%26view%3Dlist%26catm%3D2%26order%3Dorder_num%26xclosed%3D0%26featured%3D0%26lotnum%3D25</a></p>
]]></description>
					                    <pubDate>Sun, 22 Nov 2026 02:07:13 +0000</pubDate>
                </item>
				                <item>
                    <title>steve004 on Winchester 1894 listed as Year 1894 but chambered in 30 W.C.F. ?</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/winchester-1894-listed-as-year-1894-but-chambered-in-30-w-c-f/#p187060</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/winchester-1894-listed-as-year-1894-but-chambered-in-30-w-c-f/#p187060</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>Bert H. said </strong></p>
<blockquote class="spPostEmbedQuote">
<p>Gunsnfishin said </p>
<blockquote class="spPostEmbedQuote">
<p>
  </p>
</blockquote>
<p>What article was it that talked about serial # 1674 as I own that very gun !<br />
  </p>
</blockquote>
<p>Pages 10 - 13 ... Winter 2008 (winchestercollector.org)<br />
Bert<br />
  </p>
</blockquote>
<p>Small world!</p>
]]></description>
					                    <pubDate>Sun, 22 Nov 2026 00:56:30 +0000</pubDate>
                </item>
				                <item>
                    <title>Bert H. on Winchester 1894 listed as Year 1894 but chambered in 30 W.C.F. ?</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/winchester-1894-listed-as-year-1894-but-chambered-in-30-w-c-f/#p187059</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/winchester-1894-listed-as-year-1894-but-chambered-in-30-w-c-f/#p187059</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>Gunsnfishin said </strong></p>
<blockquote class="spPostEmbedQuote">
<p>
  </p>
</blockquote>
<p>What article was it that talked about serial # 1674 as I own that very gun !<br />
  </p>
</blockquote>
<p>Pages 10 - 13 ... <a href="https://winchestercollector.org/magazines/200801/10/" target="_blank">Winter 2008 (winchestercollector.org)</a></p>
<p>Bert</p>
]]></description>
					                    <pubDate>Sun, 22 Nov 2026 00:51:11 +0000</pubDate>
                </item>
				                <item>
                    <title>TXGunNut on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-3/#p187058</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-3/#p187058</guid>
					                        <description><![CDATA[<p>Chuck-</p>
<p>As mentioned above I neglected to measure ID after expanding with the .379" expanding die but as you may be able to see the bullet expanded the case when I seated it so the neck tension is a hard number to put a finger on. A more appropriate way of looking at it may be that we have a .380" bullet and .020" of brass compressed to .393 at the case mouth and about .395" just below that so I would say the undersized case compressed the lead bullet .005" and the kiss of the sizing die brought the compression value to 007" at the case mouth with this particular lot of cases and bullets. The sizing die simply applied enough of a tapered crimp to the mouth to allow it to chamber. The most important numbers in all the above are the .393" case mouth and the .395" diameter just below that point as those are the apparent maximum diameters for my 38-55's. It's encouraging that Zeb's chamber is apparently very similar is those dimensions to my older rifles and the bore is somewhat smaller. I think he will be pleased with the results.</p>
<p> </p>
<p>Mike</p>
]]></description>
					                    <pubDate>Sun, 22 Nov 2026 00:26:52 +0000</pubDate>
                </item>
				                <item>
                    <title>Gunsnfishin on Winchester 1894 listed as Year 1894 but chambered in 30 W.C.F. ?</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/winchester-1894-listed-as-year-1894-but-chambered-in-30-w-c-f/#p187057</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/winchester-1894-listed-as-year-1894-but-chambered-in-30-w-c-f/#p187057</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>hawssie said </strong><br />
I took advantage of the great magazine archives from the past and in the 2008 winter issue I found out some interesting information. It has serial number 1674 as the last model 1894 shipped out in 1894. The article goes into much detail about the internal/external screw configuration on the receiver sides for the cartridge guides and how they found some what they call early or first model guns made 1894, 1895 that had the later internal screw set up and how the vast majority has the external screw set up during those 2 years. It quotes "they are far more rare than those with external screws made in period 1894 and 1895 and should be given higher status." So if my rifle  was indeed shipped in aug 1895 and it does have the internal screws, my gun now has status! I hope that doesn't make it a snob! <br />
  </p>
</blockquote>
<p>What article was it that talked about serial # 1674 as I own that very gun !</p>
]]></description>
					                    <pubDate>Sun, 22 Nov 2026 00:02:54 +0000</pubDate>
                </item>
				                <item>
                    <title>steve004 on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-3/#p187056</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-3/#p187056</guid>
					                        <description><![CDATA[<p>Hmmm.... I guess I'm the odd man out.  I've been loading .38-55's for over 40 years and have shot my own loads in Winchester M1894's, Marlin M1893's and Savage M1899's.  The only difficulty I've ever had was the finished round not fully chambering - which was solved by running the loaded round slightly into the sizing die.  Seemingly, I've escaped a level of craziness that I never knew was lurking around the corner.</p>
]]></description>
					                    <pubDate>Sun, 22 Nov 2026 00:00:57 +0000</pubDate>
                </item>
				                <item>
                    <title>Chuck on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p187052</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p187052</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>TXGunNut said </strong><br />
I decided to refresh my memory as it's been a few months since I reloaded the 38-55. I have some new Starline 2.125" brass on hand, case mouth ID .370" and thickness .010". I ran them thru the sizer just to make sure the mouth was round and flared the case mouth just enough to let the .380" cast bullet enter the case. The expander also expands the neck a bit but I did not measure that. I used my little pocket Hornady scale to measure the 22 grns of IMR4198 powder and seated the bullet to 2.50", AKA 38-55 Load 8B in my load notes book. Bert has already noticed that 22 is exactly 40% of 55. I worked up this load before I knew that formula! Since there was obviously plenty of neck tension I stopped short of applying a light roll crimp. I then removed the decapping pin and screwed the sizing die a few turns into my RCBS RS press to "kiss" the case mouth. The result was a case mouth diameter of .393", an easy fit in a 1894 carbine I had handy. It's a bit windy and dreary here today, tomorrow's forecast is no better. With a screen name of TXGunNut I can make no credible claims to sanity so I won't address the topic title. I think it went quite well but it's all speculation until the trigger is pulled.<br />
 <br />
Mike</p>
<p>  </p>
</blockquote>
<p>What was the case neck diameter before and after seating the bullet?  My guess is that you have .003" of neck tension.  .370" + .010" +.010" = .390" then .393" after seating the bullet.  .010" of neck wall thickness is really good for modern brass.  Most modern brass is thicker therefore less case volume and higher pressure. </p>
]]></description>
					                    <pubDate>Sat, 21 Nov 2026 23:19:41 +0000</pubDate>
                </item>
				                <item>
                    <title>TXGunNut on Buy a 38-55 and make yourself crazy</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p187051</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/buy-a-38-55-and-make-yourself-crazy/page-2/#p187051</guid>
					                        <description><![CDATA[<p>I decided to refresh my memory as it's been a few months since I reloaded the 38-55. I have some new Starline 2.125" brass on hand, case mouth ID .370" and thickness .010". I ran them thru the sizer just to make sure the mouth was round and flared the case mouth just enough to let the .380" cast bullet enter the case. The expander also expands the neck a bit but I did not measure that. I used my little pocket Hornady scale to measure the 22 grns of IMR4198 powder and seated the bullet to 2.50", AKA 38-55 Load 8B in my load notes book. Bert has already noticed that 22 is exactly 40% of 55. I worked up this load before I knew that formula! Since there was obviously plenty of neck tension I stopped short of applying a light roll crimp. I then removed the decapping pin and screwed the sizing die a few turns into my RCBS RS press to "kiss" the case mouth. The result was a case mouth diameter of .393", an easy fit in a 1894 carbine I had handy. It's a bit windy and dreary here today, tomorrow's forecast is no better. With a screen name of TXGunNut I can make no credible claims to sanity so I won't address the topic title. I think it went quite well but it's all speculation until the trigger is pulled.</p>
<p> </p>
<p>Mike</p>
<p><img data-upload="1" data-width="480" data-height="360" title="IMG_5101.jpeg" alt="IMG_5101.jpeg" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/bikenmike26yahoo-com/2026/11/IMG_5101.jpeg" /></p>
]]></description>
					                    <pubDate>Sat, 21 Nov 2026 22:47:50 +0000</pubDate>
                </item>
				                <item>
                    <title>Anthony #5411 on Rookie Collector needs advice</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/rookie-collector-needs-advice/#p187049</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/rookie-collector-needs-advice/#p187049</guid>
					                        <description><![CDATA[<p>Burt, and Chuck,</p>
<p>A couple nice specimens, for sure, and especially the one Burt is showing and sharing with us. For some reason, I remember that 92 deluxe my friend was telling me about, which I didn't make a move on, was $7,000.00. Seems like a bargain today, I know, and the old hind sight is creeping in! LOL!</p>
<p>Thanks for sharing Gents!</p>
<p>Tony</p>
]]></description>
					                    <pubDate>Sat, 21 Nov 2026 22:15:45 +0000</pubDate>
                </item>
				                <item>
                    <title>Chuck on My newly acquired 1873 -s/n 433,646B Sporting Rifle</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/page-2/#p187048</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/my-newly-acquired-1873-s-n-433646b-sporting-rifle/page-2/#p187048</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>Dermot said </strong></p>
<blockquote class="spPostEmbedQuote">
<p>Chuck said<br />
And the barrel is stamped 38?<br />
When I first started I was lucky to find a mentor and traveled to shows with him.  I was lucky if I could buy 1 gun a year.  I'd pick one model and then learned everything I could about that specific model. A library is very important but picking up as many guns as you can is more important. <br />
  </p>
</blockquote>
<p>Different priorities here. Yes, the barrel is stamped 38 WCF<br />
  </p>
</blockquote>
<p>The reason I asked about the caliber marking is that only the early 44's didn't have the caliber marking on the lifter.  Different priorities?  I don't understand?</p>
<p>You should buy what you like. </p>
]]></description>
					                    <pubDate>Sat, 21 Nov 2026 21:59:44 +0000</pubDate>
                </item>
				                <item>
                    <title>Chuck on Rookie Collector needs advice</title>
                    <link>https://winchestercollector.org/forum/winchester-rifles/rookie-collector-needs-advice/#p187047</link>
                    <category>Winchester Rifles</category>
                    <guid isPermaLink="true">https://winchestercollector.org/forum/winchester-rifles/rookie-collector-needs-advice/#p187047</guid>
					                        <description><![CDATA[<p>One of our WACA Members has a real nice one that I saw last year in Colorado.  It had a $22,000 sticker on it.</p>
<p>Here is a picture of my 44 Cal rifle.  I believe that it has been messed with some on the receiver and butt plate but I paid about half of what an un molested one is worth.</p>
<p><img data-upload="1" data-width="4419" data-height="958" title="Win-1892-Deluxe.jpg" alt="Win-1892-Deluxe.jpg" src="https://winchestercollector.org/wp-content/sp-resources/forum-image-uploads/cwachter/2026/11/Win-1892-Deluxe.jpg" /></p>
]]></description>
					                    <pubDate>Sat, 21 Nov 2026 21:52:25 +0000</pubDate>
                </item>
				    </channel>
	</rss>
